1 # Ocean Interpreter test code
3 Regular testing is, of course, important for developing any software.
4 The Ocean interpreted is no exception. This document allows easy
7 - a collection of test program
8 - the expected output of these programs when run with various arguments
9 - some "Makefile" code to tie it all together.
11 Three different sorts of tests are run. As soon as any fail, the whole
14 1/ Each program is run and the output is compared against the expected
16 2/ Each program is then run under valgrind, and an error is reported
17 if valgrind detects an error, or if it reports and lost or unfreed
19 3/ Each program is parsed and printed, then the result is parsed and printed.
20 The two results must match.
21 4/ Each program is run with a version of `oceani` with test-coverage
22 recording enabled. Once all programs have successfully run and
23 all the coverage data is available, we check that all lines have
24 been tested at least once. A few exceptions are allowed such as
25 lines that call `abort()`. If any non-exceptional lines have not
26 been run, this final test fails.
27 Until the tests suite is (more) completed, we only throw and error
28 if fewer than 75% of the lines have been tested.
30 Each test has a name, which used to identify the section in this file, and optionally some
31 arguments separated from the name by commas. For each test, there is a section named
32 "output:" followed by the name-and-arguments.
34 ###### File: oceani-tests.mk
38 oceani_valg_tests := $(oceani_tests)
41 tests:: oceani_test_suite
42 oceani_test_suite: oceani coverage_oceani
43 @echo -n Checking grammar ...
44 @./parsergen --report --LALR --tag Parser oceani.mdc | grep " - no conflicts" > /dev/null || \
45 { echo "Grammar contains conflicts, please review" ; exit 1; }
47 @rm -rf coverage; mkdir -p coverage
49 @for T in $(oceani_tests); do \
50 echo -n "Test $$T.. "; \
51 i="$$IFS"; IFS=,; set $$T; IFS="$$i"; t=$$1; shift; \
52 ./md2c oceani-tests.mdc "output: $$T" | grep -v '^#' > .tmp.want; \
53 ./oceani --section "test: $$t" oceani-tests.mdc $${1+"$$@"} > .tmp.have; \
54 if ! cmp -s .tmp.want .tmp.have; then \
55 echo "FAILED"; diff -u .tmp.want .tmp.have ; exit 1; fi ;\
56 echo -n "printing.. "; \
57 echo '``````' > .tmp.code1; echo '``````' > .tmp.code2 ;\
58 ./oceani --noexec --print --section "test: $$t" oceani-tests.mdc >> .tmp.code1; \
59 ./oceani --noexec --print .tmp.code1 >> .tmp.code2 || exit 1;\
60 if ! cmp -s .tmp.code1 .tmp.code2; then \
61 echo " Failed"; diff -u .tmp.code1 .tmp.code2; exit 1 ; fi ; \
62 echo -n "extra-newlines.. "; \
64 ' .tmp.code1 > .tmp.code1a; \
65 echo '``````' > .tmp.code2a ;\
66 ./oceani --noexec --print .tmp.code1a >> .tmp.code2a || exit 1;\
67 if ! cmp -s .tmp.code1 .tmp.code2a; then \
68 echo " Failed"; diff -u .tmp.code1 .tmp.code2a; exit 1; fi ; \
69 echo -n "exec-after-print.. "; \
70 ./oceani .tmp.code1 $${1+"$$@"} > .tmp.have ; \
71 if ! cmp -s .tmp.want .tmp.have; then \
72 echo " FAILED"; diff -u .tmp.want .tmp.have; exit 1;fi; \
74 ./coverage_oceani --print --section "test: $$t" oceani-tests.mdc $${1+"$$@"} > /dev/null ; \
75 ./coverage_oceani -tpbn --section "test: $$t" oceani-tests.mdc > /dev/null 2>&1; \
80 @for i in coverage/#*.gcda; do mv $$i coverage/$${i##*#}; done
81 @gcov -o coverage oceani.mdc > /dev/null 2> /dev/null
82 @mv *.gcov coverage ; [ -f .gcov ] && mv .gcov coverage || true
85 @[ -n "$$SKIP_VALGRIND" ] || for T in $(oceani_valg_tests); do \
86 echo -n "Valgrind $$T.. "; \
87 i="$$IFS"; IFS=,; set $$T; IFS="$$i"; t=$$1; shift; \
88 if valgrind --error-exitcode=42 --log-file=.tmp.valg ./oceani --section "test: $$t" oceani-tests.mdc $${1+"$$@"} \
89 > /dev/null 2>&1 ; [ $$? -eq 42 ] ; then \
90 echo "FAILED"; cat .tmp.valg; exit 1; fi ; \
91 if grep 'LEAK SUMMARY' .tmp.valg > /dev/null; then \
92 echo "valgrind found LEAKS"; cat .tmp.valg ; exit 1 ; fi; \
93 if grep 'in use at exit [1-9]' .tmp.valg > /dev/null; then \
94 echo "valgrind found memory in use at exit"; cat .tmp.valg ; exit 1 ; fi; \
98 @[ -n "$$SKIP_COVERAGE_CHECK" ] || awk '/NOTEST/ { next } /^ *[1-9]/ {ran+=1} /^ *###/ {skip+=1} \
99 END {printf "coverage: %6.2f%%\n", ran * 100 / (ran + skip); \
100 if (ran < (ran + skip) *0.972) exit(1) }' \
101 coverage/oceani.mdc.gcov
103 coverage_oceani: oceani.c
104 $(CC) $(CFLAGS) --coverage -fprofile-dir=coverage -o coverage_oceani oceani.c $(LDLIBS)
106 ## Values and variables
108 The first test stores values in variables and performs various
109 calculations on them.
112 oceani_tests += "valvar"
116 func main(argv:[argc::]string)
117 a := 23; b:=12 ; b1 := -b
118 print a, b, a+b, a-b, a*b, a/b, a%b
119 print a<b, a<=b, a>b, a>=b, a<a, a==b, a==a
120 print +a, +b, +b1, -a, -b, -b1
121 x := True; y := False
122 print x and y, x or y, x and x, y or y, x and not x, x < y
124 c ::= "This is a string"
125 d ::= " field theory"
128 aconst :: string = "unchanging"
142 print "z??False", z??False, "w??False", w??False
146 ###### output: valvar
148 23 12 35 11 276 1.916666667 11
149 False False True True False False True
151 False True True False False False
152 This is a string field theory This is a string field theory
156 z??False True w??False False
158 Next we change the value of variables
161 oceani_tests += "setvar"
168 a = (a + a) * (a + a)
172 ###### output: setvar
178 oceani_tests += "consts"
184 four ::= 2 + 2 ; five ::= 10/2
185 const pie ::= "I like Pie";
186 cake ::= "The cake is"
190 print "Hello World, what lovely oceans you have!"
191 print "are there", five, "?"
192 print pi, pie, "but", cake, "Tau is", tau
194 ###### output: consts
195 Hello World, what lovely oceans you have!
197 3.141592653 I like Pie but The cake is a lie Tau is 6.283185306
199 Test merging of variables from multiple cases
202 oceani_tests += varmerge
204 ###### test: varmerge
207 for i:=0; then i=i+1; while i < 5:
210 case 1: scratch:=42; num:="one"
217 for i:=0; then i=i+1; while i < 5:
224 // re-declare a CondScope variable
229 ###### output: varmerge
230 zero , one , two , three , many ,
233 ## Conditions and Loops
235 Now we need to test if/else and some different loops
238 oceani_tests += cond_loop
240 ###### test: cond_loop
248 for b:=1; then b=b+b; while b < 100:
251 // Newtons method for square root of 2
257 current := guess * guess
258 use +(current - target) > 0.000000001
260 guess = (guess + (target / guess) ) / 2
263 print "error is ", target - guess * guess
265 for j:=0; then j = j+3 ; while j < 10:
266 if j != 0 and then 20 / j > 3:
267 print "20 /", j," =", 20 / j
269 print "I won't calculate 20 /", j
270 pi ::= 3.1415926535897
271 if 355/113 == pi or else +(pi - 355/113) < 0.001:
273 print "lower" if 355/113 < pi else "higher"
275 if pi > 3 then print "pi exceeds three"; else print "need more pie"
276 if (pi < 3) { print "not enough pi" } else { print "pi sufficient" }
277 for { i := 0; sum := 0 }
283 print "sum 1..10 is", sum
292 ###### output: cond_loop
299 error is -4.510950445e-12
300 I won't calculate 20 / 0
303 I won't calculate 20 / 9
313 The demonstration code presented in the interpreted is suitable for the test suite.
314 Here I break it into two parts, keeping the array code separate.
317 oceani_tests += "sayhello,55,33,hello,True"
318 oceani_tests += "sayhello,12,60,there,False"
320 ###### test: sayhello
322 func main(av:[ac::number]string)
323 A := $av[1]; B := $av[2]
325 bbool := av[ac-1] == "True"
326 print "Hello World, what lovely oceans you have!"
327 /* When a variable is defined in both branches of an 'if',
328 * and used afterwards, the variables are merged.
334 print "Is", A, "bigger than", B,"? ", bigger
335 /* If a variable is not used after the 'if', no
336 * merge happens, so types can be different
339 double:string = "yes"
340 print A, "is more than twice", B, "?", double
343 print "double", B, "is", double
348 print "still", bigger // check for regression in scoping
355 print "GCD of", A, "and", B,"is", a
357 print a, "is not positive, cannot calculate GCD"
359 print b, "is not positive, cannot calculate GCD"
364 print "Fibonacci:", f1,f2,
374 print astr ++ " was the str"
376 print "I found the str over " ++ astr
378 /* Binary search... */
396 print "Yay, I found", target
398 print "Closest I found was", lo
400 ###### output: sayhello,55,33,hello,True
401 Hello World, what lovely oceans you have!
402 Is 55 bigger than 33 ? yes
405 GCD of 55 and 33 is 11
406 Fibonacci: 1 1 2 3 5 8 13 21 34 55 89 144
408 Closest I found was 77.34375
410 ###### output: sayhello,12,60,there,False
411 Hello World, what lovely oceans you have!
412 Is 12 bigger than 60 ? no
415 GCD of 12 and 60 is 12
416 Fibonacci: 1 1 2 3 5 8 13 21 34 55 89 144
417 I found the str over there
418 Closest I found was 77.34375
421 oceani_tests += "insert_sort"
422 ###### test: insert_sort
427 for i:=1; then i = i + 1; while i < size:
428 n := list[i-1] * list[i-1]
429 list[i] = (n / 100) % 10000
432 for i:=0; then i = i + 1; while i < size:
433 print "list[",i,"]=",list[i]
435 for i := 1; then i=i+1; while i < size:
436 for j:=i-1; then j=j-1; while j >= 0:
437 if list[j] > list[j+1]:
442 for i:=0; then i = i + 1; while i < size:
443 print "list[",i,"]=",list[i]
445 ###### output: insert_sort
561 We already have some array tests, but this is where we put other
562 ad-hoc things array related.
565 oceani_tests += arrays
573 bools[3] = strings[1] == "Hello"
574 bools[1] = strings[2] <= "there"
576 for i:=0; then i=i+1; while i<5:
580 ra[6] = 42 // mustn't crash
581 print '', bools[i], ra[j-1],
584 ###### output: arrays
585 False 0 True 1 False 4 False 9 False 16
589 Time to test if structure declarations and accesses work correctly.
592 oceani_tests += structs
601 active:Boolean = True
603 struct baz { a:number; b:Boolean; }
609 for i:=0; then i=i+1; while i < 4:
617 info[i].size[0] = i*i
619 info[i].active = False
621 for i:=0; then i=i+1; while i < 4:
622 print info[i].name, info[i].active, info[i].size[0]
623 info[0].thing.b = True
625 ###### output: structs
634 Test functions. They don't return anything, so we need to get them to print
637 oceani_tests += functions func_ret_type
639 ###### test: functions
659 func test(n:number; s:string)
676 for i:=0; then i = i + 1; while i < 5:
678 angular := to_polar(32, 23)
679 print angular.rho, angular.theta
681 ###### output: functions
686 4 3 . 2 .. 1 ... done
689 ###### test: func_ret_type
691 func double(n:number):number
707 for j:=10; then j = j - 3; while j > -5:
708 print answer("dou","ble"), j, "is", double(j)
710 ###### output: func_ret_type
719 A simple linked list example
722 oceani_tests += "linked_list,one,two,three,four"
724 ###### test: linked_list
732 func insert(list:@linkage; new:string)
734 while ?p.next and then p.next.this < new:
741 func printlist(list:@linkage)
743 print list@.next.this
744 list = list@.next.list
746 func freelist(list:@linkage)
747 if list.next != @nil:
748 lp:@linkage = list.next.list
752 func main(argv:[ac::]string)
756 insert(lp, "@start");
758 for i:=1; then i=i+1; while i < ac:
764 ###### output: linked_list,one,two,three,four
773 ## Test code with syntax errors
775 Syntax errors aren't handled well yet - the result is almost always a
776 single message about the first error. So this section will be fairly
777 thin until we add proper parsing recovery in the face of common errors.
779 A special case of syntax errors is token errors, when a token is only
780 accepted because the parser doesn't know quite enough to reject it.
781 There are handled better as they are quite local, so a single test
782 program can trigger most of the possible errors.
784 To handle erronous code, we need a different set of tests, as we need to
785 capture `stderr`. The same test code will be used for type errors too.
786 As error messages contain the line number, and we don't want changes to
787 this file to change the reported numbers, we copy the code into a
788 separate file first, then run from there.
791 @for t in $(oceani_failing_tests); do \
792 echo -n "Test $$t ... "; \
793 ./md2c oceani-tests.mdc "output: $$t" | grep -v '^#' > .tmp.want; \
794 echo '``````' > .tmp.code; \
795 ./md2c oceani-tests.mdc "test: $$t" | grep -v '^#' >> .tmp.code; \
796 ./oceani .tmp.code > .tmp.have 2>&1; \
797 if ! cmp -s .tmp.want .tmp.have; then \
798 echo "FAILED"; diff -u .tmp.want .tmp.have ; exit 1; fi ;\
800 ./coverage_oceani --section "test: $$t" oceani-tests.mdc > /dev/null 2>&1 ;\
803 ###### combine test lists
804 oceani_valg_tests += $(oceani_failing_tests)
807 oceani_failing_tests := syn1
808 oceani_failing_tests += tokerr
813 if then else while do
816 .tmp.code:3:11: Syntax error in statement: then
820 a := 1i // imaginary numbers aren't understood
821 b:[2i]number // array sizes are handled separately
822 c:[3.14159]Boolean // array sizes must be integers
823 d:[1_000_000_000_000]number // they mustn't be huge
824 patn: string = "foo[ ,_]*bar"re // regexp strings are just a dream
827 This is a multiline string
828 With an unsupportable suffix
832 yy:[unknowable]number
834 zz:[zzsize]string // size must be constant, use ::=
836 // These numbers should be bad in all contexts: FIXME
839 ###### output: tokerr
840 .tmp.code:3:13: error: unsupported number suffix: 1i
841 .tmp.code:4:11: error: unsupported number suffix: 2i
842 .tmp.code:5:11: error: array size must be an integer: 3.14159
843 .tmp.code:6:11: error: array size is too large: 1_000_000_000_000
844 .tmp.code:7:23: error: unsupported string suffix: "foo[ ,_]*bar"re
845 .tmp.code:9:17: error: unsupported string suffix: """
846 This is a multiline string
847 With an unsupportable suffix
849 .tmp.code:15:12: error: name undeclared: unknowable
850 .tmp.code:17:12: error: array size must be a constant: zzsize
851 .tmp.code:20:12: error: unrecognised number: 00123
852 .tmp.code:14:11: error: type used but not declared: unknown
854 ## Tests for type errors
856 Type error don't cause parsing to abort, so we can fit many in the
857 one test program. Some type errors are found during the parse, others
858 during type analysis which doesn't run if parsing failed. So we cannot
859 fit everything in one.
861 These programs were generated by looking for the
862 various places that `type_err()` are called.
865 oceani_failing_tests += type_err1 type_err2 type_err3 type_err4 type_err5 type_err6
867 ###### test: type_err1
870 print "hello" ++ 5, 5 ++ "hello"
875 if 3 * 4 and not True: print "Weird"
879 ###### output: type_err1
880 .tmp.code:3:25: error: expected string found number
881 .tmp.code:3:28: error: expected string found number
882 .tmp.code:6:8: error: Cannot assign to a constant: b
883 .tmp.code:5:8: info: name was defined as a constant here
884 .tmp.code:8:11: error: Arithmetic returns number but Boolean expected
885 .tmp.code:9:20: error: expected number found label
886 .tmp.code:9:8: info: variable 'd' was set as number here.
887 .tmp.code:10:8: error: cannot assign to an rval
888 oceani: type error in program - not running.
890 ###### test: type_err2
900 ###### output: type_err2
901 .tmp.code:4:8: error: variable 'a' redeclared
902 .tmp.code:3:8: info: this is where 'a' was first declared
903 .tmp.code:5:8: error: variable 'a' redeclared
904 .tmp.code:3:8: info: this is where 'a' was first declared
905 .tmp.code:6:8: error: variable 'a' redeclared
906 .tmp.code:3:8: info: this is where 'a' was first declared
907 .tmp.code:7:8: error: variable 'a' redeclared
908 .tmp.code:3:8: info: this is where 'a' was first declared
909 .tmp.code:8:8: Variable declared with no type or value: c
911 ###### test: type_err3
920 c = "hello" ++ (True and False)
922 print 45 + ( "Hello" ++ "there")
932 case "Hello": print "Hello"
934 a1:[5]number; a2:[5]number; a3:[10]number; a4:[5]string
948 // trigger 'labels not permitted' error message
949 while 1 if True else False:
953 ###### output: type_err3
954 .tmp.code:8:12: error: expected number but variable 'c' is string
955 .tmp.code:7:8: info: this is where 'c' was set to string
956 .tmp.code:8:12: error: Arithmetic returns number but string expected
957 .tmp.code:7:8: info: variable 'c' was set as string here.
958 .tmp.code:9:24: error: Boolean operation found where string expected
959 .tmp.code:7:8: info: variable 'c' was set as string here.
960 .tmp.code:10:12: error: Comparison returns Boolean but string expected
961 .tmp.code:7:8: info: variable 'c' was set as string here.
962 .tmp.code:11:21: error: Concat returns string but number expected
963 .tmp.code:12:8: error: string cannot be indexed
964 .tmp.code:12:8: error: string cannot be indexed
965 .tmp.code:21:13: error: expected number found string
966 .tmp.code:17:16: error: expected number, found string
967 .tmp.code:24:8: error: cannot assign value of type [5]number
968 .tmp.code:25:13: error: expected [5]number but variable 'a3' is [10]number
969 .tmp.code:23:36: info: this is where 'a3' was set to [10]number
970 .tmp.code:25:8: error: cannot assign value of type [5]number
971 .tmp.code:23:8: info: variable 'a1' was set as [5]number here.
972 .tmp.code:26:13: error: expected [5]number but variable 'a4' is [5]string
973 .tmp.code:23:51: info: this is where 'a4' was set to [5]string
974 .tmp.code:26:8: error: cannot assign value of type [5]number
975 .tmp.code:23:8: info: variable 'a1' was set as [5]number here.
976 .tmp.code:27:16: error: expected number found string
977 .tmp.code:28:16: error: expected string found Boolean
978 .tmp.code:29:12: error: have number but need string
979 .tmp.code:7:8: info: variable 'c' was set as string here.
980 .tmp.code:32:8: error: variable used but not declared: foo
981 .tmp.code:32:8: error: field reference on none is not supported
982 .tmp.code:32:16: error: expected none found number
983 .tmp.code:33:14: error: field reference on string is not supported
984 .tmp.code:34:14: error: cannot find requested field in foo
985 .tmp.code:35:17: error: have string but need number
986 .tmp.code:38:29: error: expected number found Boolean
987 oceani: type error in program - not running.
989 ###### test: type_err4
994 ###### output: type_err4
995 .tmp.code:3:14: error: variable used but not declared: b
996 .tmp.code:3:16: error: expected none found number
997 .tmp.code:3:14: info: variable 'b' was set as none here.
998 oceani: type error in program - not running.
1000 ###### test: type_err5
1010 ###### output: type_err5
1011 .tmp.code:8:7: error: type already declared: foo
1012 .tmp.code:2:7: info: this is location of declartion: foo
1013 .tmp.code:5:7: error: type has recursive definition: baz
1014 .tmp.code:2:7: error: type has recursive definition: foo
1016 ###### test: type_err6
1024 ###### output: type_err6
1025 .tmp.code:4:12: error: '?' requires a testable value, not string
1026 .tmp.code:6:14: error: "??" requires a testable value, not string
1027 oceani: type error in program - not running.
1031 oceani_failing_tests += type_err_const type_err_const1 type_err_const2 missing_program bad_main
1033 ###### test: type_err_const
1036 bar ::= "string" + 56
1043 // trigger duplicate-main error
1048 ###### output: type_err_const
1049 .tmp.code:6:8: error: name already declared: bar
1050 .tmp.code:4:8: info: this is where 'bar' was first declared
1051 .tmp.code:8:8: error: variable 'foo' redeclared
1052 .tmp.code:3:8: info: this is where 'foo' was first declared
1053 .tmp.code:12:5: error: function 'main' redeclared
1054 .tmp.code:7:5: info: this is where 'main' was first declared
1055 .tmp.code:13:8: error: variable 'foo' redeclared
1056 .tmp.code:3:8: info: this is where 'foo' was first declared
1057 .tmp.code:4:16: error: expected number found string
1059 ###### test: type_err_const1
1067 ###### output: type_err_const1
1068 .tmp.code:3:12: Syntax error in constant: :
1069 .tmp.code:4:12: Syntax error in constant: :
1071 ###### test: type_err_const2
1076 ###### output: type_err_const2
1077 .tmp.code:3:8: error: const four cannot be resolved.
1078 .tmp.code:4:8: error: const two cannot be resolved.
1080 ###### test: missing_program
1084 ###### output: missing_program
1085 oceani: no main function found.
1087 ###### test: bad_main
1088 func main(foo:string)
1091 ###### output: bad_main
1092 .tmp.code:2:10: error: expected []string but variable 'foo' is string
1093 .tmp.code:2:10: info: this is where 'foo' was set to string
1094 oceani: main has wrong type.
1096 Test for type errors with functions
1099 oceani_failing_tests += func_err_args func_err_redeclare
1101 ###### test: func_err_args
1103 func test1(a:number; b:string; c:[3]Boolean)
1106 func test2(a:number; b:string; c:[3]Boolean)
1110 # use undefined names
1118 test1(1, "two", truth)
1120 test1(1, "lo", truth, 4)
1121 print test(), test1(1,2,3)
1125 func test4(a:number):string
1128 func test5(a:number):string
1135 func test6(a:number):foo
1140 ###### output: func_err_args
1141 .tmp.code:34:5: error: function cannot return value of type foo
1142 .tmp.code:28:8: error: expected string, found none
1143 .tmp.code:25:8: error: expected string, found number
1144 .tmp.code:15:14: error: insufficient arguments to function.
1145 .tmp.code:16:14: error: expected number found string
1146 .tmp.code:16:22: error: expected string found number
1147 .tmp.code:16:14: error: insufficient arguments to function.
1148 .tmp.code:18:17: error: expected string found number
1149 .tmp.code:19:14: error: too many arguments to function.
1150 .tmp.code:20:14: error: attempt to call a non-function.
1151 .tmp.code:20:32: error: expected string found number
1152 .tmp.code:20:28: error: insufficient arguments to function.
1153 .tmp.code:21:20: error: expected "func test1" but variable 'test2' is "func test2"
1154 .tmp.code:5:5: info: this is where 'test2' was set to "func test2"
1155 .tmp.code:10:14: error: variable used but not declared: a
1156 .tmp.code:10:17: error: variable used but not declared: z
1157 oceani: type error in program - not running.
1159 ###### test: func_err_redeclare
1161 func test1(a:number; b:string; c:[3]Boolean)
1173 ###### output: func_err_redeclare
1174 .tmp.code:5:5: error: function 'test1' redeclared
1175 .tmp.code:2:5: info: this is where 'test1' was first declared
1176 .tmp.code:9:5: error: function 'test1' redeclared
1177 .tmp.code:2:5: info: this is where 'test1' was first declared
1179 Test for errors with references
1182 oceani_failing_tests += ref_err1 ref_err2
1184 ###### test: ref_err1
1192 ###### output: ref_err1
1193 .tmp.code:4:9: error: only "@free" makes sense here: foo
1194 .tmp.code:5:15: error: Only reference function is "@new()": old
1195 .tmp.code:6:19: error: Only reference value is "@nil": null
1197 ###### test: ref_err2
1203 if num == @nil or ref == ref2 or ref == 2 or ref.foo:
1207 ###### output: ref_err2
1208 .tmp.code:5:22: error: @new() can only be used with references, not number
1209 .tmp.code:5:8: info: variable 'num' was set as number here.
1210 .tmp.code:6:14: error: Cannot dereference number
1211 .tmp.code:7:19: error: @nil can only be used with reference, not number
1212 .tmp.code:7:33: error: expected @number but variable 'ref2' is @string
1213 .tmp.code:4:8: info: this is where 'ref2' was set to @string
1214 .tmp.code:7:48: error: expected @number found number
1215 .tmp.code:7:53: error: field reference on number is not supported
1216 .tmp.code:7:56: error: have none but need Boolean
1217 .tmp.code:8:17: error: @free can only be assigned a reference, not number
1218 .tmp.code:8:17: error: @free can only be assigned a reference, not number
1219 .tmp.code:9:8: error: Cannot assign an rval to a reference.
1220 oceani: type error in program - not running.
1222 ## Test erroneous command line args
1224 To improve coverage, we want to test correct handling of strange command
1225 line arguments. These tests won't use code, so the exiting test types
1226 won't work. So we need to be able to explicitly give the command line,
1227 and the expected output, and have that tested and the coverage assessed.
1228 Rather than having to spell out the whole command name, just give "cmd",
1229 and discard that. Requiring but discarding the command make an empty
1230 command list possible.
1233 @for t in $(oceani_special_tests); do \
1234 echo -n "Test $$t ... ";\
1235 i="$$IFS"; IFS=,; set $$t; IFS="$$i"; shift ;\
1236 ./md2c oceani-tests.mdc "output: $$t" | grep -v '^#' > .tmp.want; \
1237 ./oceani $${1+"$$@"} > .tmp.have 2>&1 ;\
1238 if ! cmp -s .tmp.want .tmp.have; then \
1239 echo "FAILED"; diff -u .tmp.want .tmp.have ; exit 1; fi ;\
1241 ./coverage_oceani $${1+"$$@"} > /dev/null 2>&1 ;\
1243 ###### valgrind test code
1244 @[ -n "$$SKIP_VALGRIND" ] || for t in $(oceani_special_tests); do\
1245 echo -n "Valgrind $$t.. "; \
1246 i="$$IFS"; IFS=,; set $$t; IFS="$$i"; shift ;\
1247 if valgrind --error-exitcode=42 --log-file=.tmp.valg ./oceani $${1+"$$@"} > .tmp.have 2>&1 ;\
1248 [ $$? -eq 42 ]; then \
1249 echo "FAILED"; cat .tmp.valg; exit 1; fi ; \
1250 if grep 'LEAK SUMMARY' .tmp.valg > /dev/null; then \
1251 echo "valgrind found LEAKS"; cat .tmp.valg ; exit 1 ; fi; \
1252 if grep 'in use at exit [1-9]' .tmp.valg > /dev/null; then \
1253 echo "valgrind found memory in use at exit"; cat .tmp.valg ; exit 1 ; fi; \
1258 oceani_special_tests += "cmd"
1259 oceani_special_tests += "cmd,-zyx"
1260 oceani_special_tests += "cmd,nofile"
1261 oceani_special_tests += "cmd,/dev/null"
1262 oceani_special_tests += "cmd,--section,toast:nothing,oceani-tests.mdc"
1265 oceani: no input file given
1267 ###### output: cmd,-zyx
1268 ./oceani: invalid option -- 'z'
1269 Usage: oceani --trace --print --noexec --brackets --section=SectionName prog.ocn
1271 ###### output: cmd,nofile
1272 oceani: cannot open nofile
1274 ###### output: cmd,/dev/null
1275 oceani: could not find any code in /dev/null
1277 ###### output: cmd,--section,toast:nothing,oceani-tests.mdc
1278 oceani: cannot find section toast:nothing