]> ocean-lang.org Git - ocean/blobdiff - csrc/scanner.mdc
Remove excess blank lines
[ocean] / csrc / scanner.mdc
index 05df51d4be5f2b04e5b37b8859bbcc4b938e978c..42001ff895b0196a7ab83e30afb5c50b5eae1cf0 100644 (file)
@@ -85,12 +85,11 @@ from token to token.
 ###### token_next init
        int ignored = state->conf->ignored;
 
-
 The different tokens are numbers, words, marks, strings, comments,
 newlines, EOF, and indents, each of which is examined in detail below.
 
 There are various cases where no token can be found in part of the
-input.  All of these will be reported as an `TK_error` token.
+input.  All of these will be reported as a `TK_error` token.
 
 It is possible to declare a number of strings which form distinct
 tokens (rather than being grouped as e.g. 'word').  These are given
@@ -106,7 +105,7 @@ token numbers from `TK_reserved` upwards.
 ### Numbers
 
 Numbers are the messiest tokens to parse, primarily because they can
-contain characters that also have meaning outside of number and,
+contain characters that also have meaning outside of numbers and,
 particularly, immediately after numbers.
 
 The obvious example is the '`-`' sign.  It can come inside a number for
@@ -260,6 +259,9 @@ and the length of the list must be given (`known_count`).
 Tokens matching these known words are reported as the index of the
 list added to `TK_reserved`.
 
+If identifiers are ignored, then any word which is not listed as a
+known word results in an error.
+
 ###### token config parameters
        const char **words_marks;
        int known_count;
@@ -321,10 +323,17 @@ below before giving up and assuming an unknown mark.
 
 If an unknown mark contains a quote character or a comment marker, and
 that token is not being ignored, then we terminate the unknown mark
-before that quote or comment.  This ensure that an unknown mark
+before that quote or comment.  This ensures that an unknown mark
 immediately before a string is handled correctly.
 
-If `TK_mark` is ignored, then unknown marks as returned as an error.
+If the first character of a comment marker (i.e. '/') is a known mark,
+the above rules would suggest that the start of a comment would be
+parsed as that mark, which is not what is wanted.  So the introductory
+sequences for a comment ("//" and "/*") are treated as
+partially-known.  They prevent the leading "/" from being a mark by
+itself, but do not actually constitute a stand-alone mark.
+
+If `TK_mark` is ignored, then unknown marks are returned as errors.
 
 ###### token types
        TK_mark,
@@ -341,7 +350,16 @@ Known marks are included in the same list as the list of known words.
                if (n >= 0)
                        tk.num = TK_reserved + n;
                else if (tk.num != TK_error) {
-                       /* found a longest-known-mark */
+                       /* found a longest-known-mark, still need to
+                        * check for comments
+                        */
+                       if (tk.txt.len == 2 && tk.txt.txt[0] == '/' &&
+                           (ch == '/' || ch == '*')) {
+                               /* Yes, this is a comment, not a '/' */
+                               restore_unget_state(state);
+                               tk.num = TK_error;
+                               break;
+                       }
                        unget_char(state);
                        close_token(state, &tk);
                        return tk;
@@ -349,15 +367,22 @@ Known marks are included in the same list as the list of known words.
                prev = ch;
                save_unget_state(state);
                ch = get_char(state);
-               if (!(ignored && (1<<TK_string)) && is_quote(ch))
+               if (!(ignored & (1<<TK_string)) && n < 0 &&is_quote(ch) && !is_quote(prev))
+                       /* If strings are allowed, a quote (Which isn't a known mark)
+                        * mustn't be treated as part of an unknown mark.  It can be
+                        * part of a multi-line srtings though.
+                        */
                        break;
-               if (prev == '#')
+               if (prev == '#' && n < 0)
+                       /* '#' is not a known mark, so assume it is a comment */
                        break;
-               if (prev == '/' && ch == '/' && tk.txt.len > 1) {
+               if (prev == '/' && ch == '/' && tk.txt.len == 1 && n < 0) {
+                       close_token(state, &tk);
                        restore_unget_state(state);
                        break;
                }
-               if (prev == '/' && ch == '*' && tk.txt.len > 1) {
+               if (prev == '/' && ch == '*' && tk.txt.len == 1 && n < 0) {
+                       close_token(state, &tk);
                        restore_unget_state(state);
                        break;
                }
@@ -376,15 +401,6 @@ before assuming that we have an unknown mark
        ## parse comment
        ## unknown mark
 
-###### unknown mark
-       if (tk.txt.len) {
-               if (ignored & (1<<TK_mark))
-                       tk.num = TK_error;
-               else
-                       tk.num = TK_mark;
-               return tk;
-       }
-
 ### Strings
 
 Strings start with one of single quote, double quote, or back quote
@@ -392,7 +408,7 @@ and continue until a matching character on the same line.  Any of
 these characters can be included in the list of known marks and then
 they will not be used for identifying strings.
 
-Immediately following the close quote one or two ASCII letters may
+Immediately following the close quote, one or two ASCII letters may
 appear.  These are somewhat like the arbitrary letters allowed in
 "Numbers" above.  They can be used by the language in various ways.
 
@@ -414,7 +430,7 @@ token types.
 ###### internal functions
        static int is_quote(wchar_t ch)
        {
-               return ch == '\'' || ch == '"' || ch == '`';
+               return ch == '\'' || ch == '"' || ch == '`'; // "
        }
 
 #### Multi-line strings
@@ -498,6 +514,10 @@ If `TK_string` is ignored, then quote characters will appear as `TK_mark`s.
                                break;
                        }
                }
+               while (!at_eon(state) && (ch = get_char(state)) &&
+                                         iswalpha(ch))
+                       ;
+               unget_char(state);
                close_token(state, &tk);
                return tk;
        }
@@ -784,7 +804,6 @@ information and return one token.
                continue;
        }
 
-
 ###### delayed tokens
 
        if (state->check_indent || state->delayed_lines) {
@@ -827,7 +846,6 @@ tokens will continue to return the same end-of-file token.
 ###### token types
        TK_eof,
 
-
 ###### white space
        if (ch == WEOF) {
                if (state->col) {
@@ -846,7 +864,21 @@ If the token we have is not empty and `TK_mark` is allowed,
 we have an unknown mark, otherwise this must be an error.
 
 ###### unknown mark
-       /* one unknown character */
+
+       /* one unknown mark character */
+       if (tk.txt.len) {
+               close_token(state, &tk);
+               if (ignored & (1<<TK_mark))
+                       tk.num = TK_error;
+               else
+                       tk.num = TK_mark;
+               return tk;
+       }
+       /* Completely unrecognised character is next, possibly
+        * a digit and we are ignoring numbers.
+        * What ever it is, make it an error.
+        */
+       get_char(state);
        close_token(state, &tk);
        tk.num = TK_error;
        return tk;
@@ -879,19 +911,23 @@ a flag that tells us whether or not we need to strip.
 
 ###### internal functions
 
-       static void do_strip(struct token_state *state)
+       static int do_strip(struct token_state *state)
        {
+               int indent = 0;
                if (state->node->needs_strip) {
                        int n = 4;
                        while (n && state->node->code.txt[state->offset] == ' ') {
+                               indent += 1;
                                state->offset += 1;
                                n -= 1;
                        }
                        while (n == 4 && state->node->code.txt[state->offset] == '\t') {
+                               indent = indent_tab(indent);
                                state->offset += 1;
                                n -= 4;
                        }
                }
+               return indent;
        }
 
        static wint_t get_char(struct token_state *state)
@@ -909,9 +945,8 @@ a flag that tells us whether or not we need to strip.
                        state->offset = 0;
                        if (state->node == NULL)
                                return WEOF;
-                       do_strip(state);
                        state->line = state->node->line_no;
-                       state->col = state->node->indent;
+                       state->col = do_strip(state);
                }
 
                ## before get_char
@@ -936,8 +971,7 @@ a flag that tells us whether or not we need to strip.
                        state->col += 1;
                } else if (is_newline(next)) {
                        state->line += 1;
-                       state->col = state->node->indent;
-                       do_strip(state);
+                       state->col = do_strip(state);
                } else if (next == '\t') {
                        state->col = indent_tab(state->col);
                }
@@ -1040,8 +1074,11 @@ parsed too much already.  For that there is `reset_token`.
        static void close_token(struct token_state *state,
                                struct token *tk)
        {
-               tk->txt.len = (state->node->code.txt + state->offset)
-                             - tk->txt.txt;
+               if (state->node != tk->node)
+                       tk->txt.len = tk->node->code.len - (tk->txt.txt - tk->node->code.txt);
+               else
+                       tk->txt.len = (state->node->code.txt + state->offset)
+                                     - tk->txt.txt;
        }
 
        static void reset_token(struct token_state *state, struct token *tok)
@@ -1053,7 +1090,6 @@ parsed too much already.  For that there is `reset_token`.
                tok->txt.len = 0;
        }
 
-
 Tokens make not cross into the next `code_node`, and some tokens can
 include the newline at the and of a `code_node`, we must be able to
 easily check if we have reached the end.  Equally we need to know if
@@ -1147,9 +1183,8 @@ As well as getting tokens, we need to be able to create the
                memset(state, 0, sizeof(*state));
                state->node = code;
                state->line = code->line_no;
-               state->col = code->indent;
+               state->col = do_strip(state);
                state->conf = conf;
-               do_strip(state);
                return state;
        }
        void token_close(struct token_state *state)
@@ -1486,7 +1521,6 @@ character `expc`.
        tok.txt += d;
        tok.len -= d;
 
-
 Now that we have the mantissa and the exponent we can multiply them
 together, also allowing for the number of digits after the decimal
 mark.
@@ -1550,7 +1584,6 @@ Now we are ready to parse a number: the base, mantissa, and exponent.
 If all goes well we check for the possible trailing letters and
 return.  Return value is 1 for success and 0 for failure.
 
-
 ###### number functions
        int number_parse(mpq_t num, char tail[3], struct text tok)
        {
@@ -1759,7 +1792,7 @@ required indent is found.
                if (c == ' ')
                        skipped += 1;
                else if (c == '\t')
-                       skipped = indent_tab(c);
+                       skipped = indent_tab(skipped);
                else
                        break;
                i+= 1;
@@ -1885,7 +1918,6 @@ String parsing goes in `libstring.c`
        libstring.o : libstring.c
                $(CC) $(CFLAGS) -c libstring.c
 
-
 ## Testing
 
 As "untested code is buggy code" we need a program to easily test
@@ -1903,6 +1935,7 @@ the tokens one per line.
        #include <stdio.h>
        #include <gmp.h>
        #include <locale.h>
+       #include <getopt.h>
        #include "mdcode.h"
        #include "scanner.h"
        #include "number.h"
@@ -1915,11 +1948,19 @@ the tokens one per line.
                fprintf(stderr, "%s\n", msg);
        }
 
+       static int kcmp(const void *ap, const void *bp)
+       {
+               char * const *a = ap;
+               char * const *b = bp;
+               return strcmp(*a, *b);
+       }
+
        int main(int argc, char *argv[])
        {
                int fd;
                int len;
                char *file;
+               char *filename = NULL;
                struct token_state *state;
                const char *known[] = {
                        "==",
@@ -1936,22 +1977,77 @@ the tokens one per line.
                        .words_marks = known,
                        .number_chars = "., _+-",
                        .known_count = sizeof(known)/sizeof(known[0]),
-                       .ignored = (0 << TK_line_comment)
-                                 |(0 << TK_block_comment),
+                       .ignored = 0,
+               };
+               static const struct option long_options[] = {
+                       { "word-start",         1, NULL, 'W'},
+                       { "word-cont",          1, NULL, 'w'},
+                       { "number-chars",       1, NULL, 'n'},
+                       { "ignore-numbers",     0, NULL, 'N'},
+                       { "ignore-ident",       0, NULL, 'I'},
+                       { "ignore-marks",       0, NULL, 'M'},
+                       { "ignore-strings",     0, NULL, 'S'},
+                       { "ignore-multi-strings",0, NULL, 'z'},
+                       { "ignore-line-comment",0, NULL, 'c'},
+                       { "ignore-newline",     0, NULL, 'l'},
+                       { "ignore-block-comment", 0, NULL, 'C'},
+                       { "ignore-indent",      0, NULL, 'i'},
+                       { "file",               1, NULL, 'f'},
+                       { NULL,                 0, NULL, 0},
                };
+               static const char options[] = "W:w:n:NIMSzclCif:";
+
                struct section *table, *s, *prev;
+               int opt;
+
                setlocale(LC_ALL,"");
-               if (argc != 2) {
-                       fprintf(stderr, "Usage: scanner file\n");
-                       exit(2);
+               while ((opt = getopt_long(argc, argv, options, long_options, NULL))
+                      != -1) {
+                       switch(opt) {
+                       case 'W': conf.word_start = optarg; break;
+                       case 'w': conf.word_cont = optarg; break;
+                       case 'n': conf.number_chars = optarg; break;
+                       case 'N': conf.ignored |= 1 << TK_number; break;
+                       case 'I': conf.ignored |= 1 << TK_ident; break;
+                       case 'M': conf.ignored |= 1 << TK_mark; break;
+                       case 'S': conf.ignored |= 1 << TK_string; break;
+                       case 'z': conf.ignored |= 1 << TK_multi_string; break;
+                       case 'c': conf.ignored |= 1 << TK_line_comment; break;
+                       case 'C': conf.ignored |= 1 << TK_block_comment; break;
+                       case 'l': conf.ignored |= 1 << TK_newline; break;
+                       case 'i': conf.ignored |= 1 << TK_in; break;
+                       case 'f': filename = optarg; break;
+                       default: fprintf(stderr, "scanner: unknown option '%c'.\n",
+                                        opt);
+                               exit(1);
+                       }
+               }
+
+               if (optind < argc) {
+                       const char **wm = calloc(argc - optind, sizeof(char*));
+                       int i;
+                       for (i = optind; i < argc; i++)
+                               wm[i - optind] = argv[i];
+                       qsort(wm, argc-optind, sizeof(char*), kcmp);
+                       conf.words_marks = wm;
+                       conf.known_count = argc - optind;
                }
-               fd = open(argv[1], O_RDONLY);
+
+               if (filename)
+                       fd = open(filename, O_RDONLY);
+               else
+                       fd = 0;
                if (fd < 0) {
                        fprintf(stderr, "scanner: cannot open %s: %s\n",
-                               argv[1], strerror(errno));
+                               filename, strerror(errno));
                        exit(1);
                }
                len = lseek(fd, 0, 2);
+               if (len <= 0) {
+                       fprintf(stderr,"scanner: %s is empty or not seekable\n",
+                               filename ?: "stdin");
+                       exit(1);
+               }
                file = mmap(NULL, len, PROT_READ, MAP_SHARED, fd, 0);
                table = code_extract(file, file+len, pr_err);
 
@@ -1995,7 +2091,10 @@ the tokens one per line.
                                if (tk.num == TK_eof)
                                        break;
                        }
+                       token_close(state);
                }
+               if (conf.words_marks != known)
+                       free(conf.words_marks);
                exit(!!errs);
        }
 ###### File: scanner.mk
@@ -2007,4 +2106,3 @@ the tokens one per line.
                        libmdcode.o libnumber.o libstring.o -licuuc -lgmp
        scanner.o : scanner.c
                $(CC) $(CFLAGS) -c scanner.c
-